|
|
New Product 1 Free
Chucking Equipment
Have you ever experienced any of the following problems
when centering, changing settings or finishing in the
fracture surface finishing of tubing or wire rods?
- Imprecise centering
- Slow recombination at the time of size change
- Flowed on the product
- Low workability with chips stuck in the equipment
Use our free chucking equipment (with automatic centering
mechanism) for a best solution.
 |
 |
| Open state |
Chucking state |
Uninterrupted operation is possible with the following
features:
1. Adaptable to any size. No need to change setups for
different sizes.
2. One touch setting with clamp mechanism.
3. High precision centering in the range of 1/100 - 3/100
mm
4. Flawless with four-plane supports.
5. Closed structure to shut off mill scales and dust.
Useful for a range of clamping and centering.
1. Chucking for tubing ends chamfering
2. Chucking for screw-cutting of tubing ends
3. Chucking for finishing round steel bar ends
4. Various clamps for wire rods
| Models |
SFC-1 |
SFC-2 |
SFC-3 |
| Cylinder Stroke |
35m/m |
100m/m |
100m/m |
| Movable Chucking Path |
f16 to 76.3
|
f60.5 to f170 |
f140 to f280 |
| Chucking Speed |
100 to 300mm/sec |
100 to 300mm/sec |
100 to 300mm/sec |
| Chucking Power |
to
4 TON |
to 10 TON |
to 14 TON |
| Chucking Accuracy |
1/100 to 3/100mm |
1/100 to 3/100mm |
1/100 to 3/100mm |
|
The above chucking accuracy is measured
for a true circle. Other types of chucking equipment
(e.g. equipment driven by a hydraulic unit) are also
available. Please contact us for more information.
| Example:
System installed |
Nippon Steel Corporation,Tokyo Works
| Should
you have any question
or concerns, please
contact. |
Mishima Kosan Co., Ltd. Kimitsu Division 4-3-1 Funawatari,
Itabashi-ku, Tokyo Japan 174-0041
Tel: +81-3-3558-8810 Fax: +81-3-3558-8955
(Person in charge: Koga) |
